Homepage Wiki Forum Buy

Construction manual GNUBLIN Module-GnuPi

From GNUBLIN

The adapter board is connected directly to the RaspberryPi. On the board there are 5 more connection options for modules. Modules are simply connected via a ribbon cable.

RASPBERRY-BRIDGE schraeg bestueckt.JPG

The display will only work on the following connector. In addition, you have to solder the two red bridges (GPIO8 -> GPIO23; GPIO4 -> GPIO14):

Note: The GPIO14 must be set to LOW prior to use by hand!

pi@raspberrypi ~ $ sudo su
root@raspberrypi:/home/pi# echo "14" > /sys/class/gpio/export
root@raspberrypi:/home/pi# echo "out" > /sys/class/gpio/gpio14/direction
root@raspberrypi:/home/pi# exit

Rasp lcd.JPG

In other languages