Homepage Wiki Forum Buy

Construction manual GNUBLIN Module-LCD 2 x 16



Construction manual display module 2x16

  • 2 x 1uF Capacitor (Attention: look at the polarity)
  • 1 x PCB
  • 1 x Display
  • 1 x 2x7 Connector

Unpack all components



Both caps have a + and - printed on the surface. You can see the + and - marker on the PCB too. It's very important that you don't solder a capacitor the wrong way. You can see one or more - signs on one side of the capacitor. After you have soldered the caps, you can cut off the wires on the bottom side of the PCB.

Bild kondensatoren.jpg Bid kondensatoren einbaun.jpg

Display and connector

The connector has a notch on one side. This notch must point to the middle of the PCB. You can also see the correct direction in the assembly pressure. You can solder the display how it is to the PCB.

Bild komplett.jpg

The painted resistors are not needed. They are optional for background light.

In other languages